Navigation & GPS
Chart plotters, IMO-standard GPS and DGPS navigators, and magnetic compasses — the equipment that tells a vessel where it is.

Koden — Navigation & GPS
2 models in this range from Koden.

Professional Chart Plotter
A working plotter aimed at fishing operations rather than leisure navigation. Marks, tracks, target tracks, routes, and screen captures are all held in internal memory and exported to SD card — so a productive ground can be recorded and returned to.
Specifications
Key Features
- Built for fishing efficiency, not leisure chartwork
- Records marks, tracks, routes, and drawings to internal memory
- Export and import freely between memory and SD card
- Screen captures saved alongside navigation data
- SD backup protects years of accumulated fishing grounds
- Clear professional display and key layout

IMO GPS / DGPS Navigator & Sensor
An IMO-standard GPS navigator and position sensor for regulated vessels. Beyond meeting the carriage requirement it acts as the vessel's position source, feeding radar, AIS, and plotters over NMEA and Ethernet.
Specifications
Key Features
- Meets IMO standards for carriage on regulated vessels
- SBAS augmentation for improved accuracy as standard
- DGPS capability with an external beacon receiver
- 5,000 waypoints and 100 routes for extensive passage planning
- Ethernet port for integration into a bridge LAN
- Two NMEA 0183 ports feed radar, AIS, and plotters

Saura — Navigation & GPS
1 model in this range from Saura.
Marine Magnetic Compass
Saura marine magnetic compasses are precision-engineered for vessel heading accuracy in all sea conditions. Liquid-dampened, temperature-compensated, and built to withstand vibration and shock.
Specifications
Key Features
- High-visibility card with degree graduation
- Oil-damped for smooth reading in rough seas
- Deviation adjustment screws
- Available in binnacle and flush-mount versions
- Built-in night lighting

Lilley & Gillie — Navigation & GPS
8 models in this range from Lilley & Gillie.

Class A Magnetic Compass
Lilley & Gillie’s Class A magnetic compass, designed to meet SOLAS carriage requirements. The magnetic compass is the one piece of navigation equipment that keeps working when the power does not, which is why it remains mandatory alongside every electronic system on the bridge.
Specifications
Key Features
- Class A compass for SOLAS-regulated vessels
- Operates with no electrical supply of any kind
- Supplied with binnacle outfits or as a standalone unit
- Periodic adjustment and deviation card service available
- Manufactured in England since 1812

Reduced-Height Binnacle Outfit
The reduced-height Sestrel binnacle outfit for smaller vessels. At 577 mm tall it is easier to fit where headroom or sightlines are tight, and less intrusive on a small bridge than a full-height binnacle.
Specifications
Key Features
- Only 577 mm tall — fits where a full binnacle will not
- Easier to install and less obstructive on a small bridge
- Complete outfit including compass and corrector system
- Sestrel binnacle, manufactured in Europe

Full-Height Binnacle Outfit
The full-height binnacle, approved for vessels of any size. Manufactured in Europe from marine-grade aluminium for long service life in a salt atmosphere, and finished in dark Admiralty Grey.
Specifications
Key Features
- Approved for vessels of any size
- Marine aluminium construction for a long service life
- Dark Admiralty Grey finish
- Manufactured in Europe
- Complete outfit with corrector system

Bearing Pelorus
A pelorus lets the officer take bearings from a position where sighting across the steering compass is impractical — around superstructure, or from a bridge wing. A simple instrument that solves a problem no electronic system addresses.
Specifications
Key Features
- Takes bearings where the compass cannot be sighted
- Used from bridge wings and obstructed positions
- Mechanical — no power required

Transmitting Magnetic Compass
A transmitting magnetic compass provides a digital output from the magnetic compass. The GS820 uses a sensor coil that reads the compass card, so the vessel’s autopilot, radar, AIS and ECDIS can all be fed heading from the one instrument that never loses power.
Specifications
Key Features
- Digital heading output from the magnetic compass
- Sensor coil reads the card without contacting it
- Feeds autopilot, radar, AIS and ECDIS from one source
- Heading survives a total electrical failure

True Heading Processing Unit
A processing unit with integrated indicators that outputs true heading, calculated from the magnetic compass heading and the local magnetic variation received from GPS — removing the manual variation correction that is easy to get wrong under pressure.
Specifications
Key Features
- Calculates true heading automatically from GPS variation
- Removes manual variation correction and its errors
- Built-in true heading display
- Works with the GS820 transmitting compass

Steering Repeater
Gives a visual indication of heading from both true and magnetic inputs, repeating the compass where the helm cannot see it directly.
Specifications
Key Features
- Displays both true and magnetic heading
- Repeats the compass at the helm position
- Pairs with the transmitting magnetic compass system
Need Help Choosing?
Tell our team the application and we will specify the right model, supply it with full manufacturer warranty, and support it locally.
Request a Quote All Marine & Navigation